香蕉tv

Welcome to Chongqing Hengqing Wood Industry Co., Ltd!

Professional timber supplier Years of experience quality assurance

Hotline:

159-2294-2427  

 Chongqing wood processing plant

News classification

Product classification

contact us

Mobile phone: 13452900368

Telephone: 023-68629813

Email: 957016287@qq.com

website: vigpschool.cn

Address: No.8, area 14, Xingsong ceramic market, Huayan Town, Jiulongpo District, Chongqing


Building timber usually plays a role in civil engineering and seismic reinforcement

Building timber usually plays a role in civil engineering and seismic reinforcement

Date of issue: 2021-04-13 Author: Click:

    Building timber Manufacturers talk about the advantages of building timber. As long as we investigate carefully in our daily life, it is not difficult to find it in our daily life. In fact, noodles are widely used in daily life. Therefore, the wood raw materials are summarized as follows:

    In the field of civil engineering, the wood used in building is often made into concrete formwork, which has a certain reinforcement effect on the formwork.

    In housing decoration, it is often used for floor decoration, and also plays an important role in the application of wood keel

    In terms of architecture, ancient people usually used wooden blocks of buildings as the material of columns.

 Construction timber in Chongqing

    In addition to furniture production, it is often considered to be the pillar of some furniture, can play a very good supporting role.

    Building wood usually plays a role in civil engineering and seismic reinforcement, so building wood plays an important role in civil engineering in China.

    The wood blocks of the building should be piled up in a pile before leaving the factory. When packing, the bottom should be padded with flat wooden strips, and the height of each stack should be within 1.2m. After stacking, it needs to be packed with sheet iron or belt. If not covered with wooden grid, then the edge of the packaged board should be protected with felt pad; If the wood square of Chengdu silicon building needs to be transported by railway, the four corners of each stack of products shall be bound with wood strips nailed into right angle angle protection, except that the wooden lattice mat at the bottom of each stack can not be bent; When transporting less than one stack or unpacked plates in bulk, they must be handled carefully and stacked neatly without adding debris and sundries. After packing, it needs to be tied with ropes. Otherwise, it will be bad if there is an accident in the transportation. After all, we are responsible for the traffic and our own safety. You can't just be convenient.

    After being stacked by the manufacturer, it should be stacked in a solid and level site or warehouse according to the different specifications of the boards. If the concealed wood is to be used, the width of the concealed wood should be less than 60 mm, and the length should be the same as the width of the wood board. The spacing between the dark wood matting points is generally 500 mm; The height of each pile shall not exceed 1.2m. If double stacking is required, the bedding point between layers must be on the same vertical plane.

    In a word, proper maintenance of wood processing can ensure the appearance quality and prolong the service life of wood.

Website: http://vigpschool.cn/news/699.html

key word: Construction timber in Chongqing , Building timber , Chongqing timber wholesale

What's new:

Online Service
share One click sharing