In engineering projects, we usually calculate the total material data information first, and then estimate the total material consumption after considering the supplier Building timber In the case of using wood, we must first understand how many squares of wood must be used in the template of each square meter of wood. In the total square meters, you can get the total construction timber required in the project. In consideration of taking the goods, we will share with you how many meters of square timber are needed for each square template.
How many meters of square timber is needed per square formwork?
We calculated that the square timber consumption of 200 square meters formwork is 300 meters long (the total length of square timber required). The ratio of the two quantities (300 / 200 = 1.5), that is to say, the square timber required per square meter of formwork is 1.5 meters. However, there may be errors in practice. We generally take the value of 1.6-1.8 m square timber / 1 square formwork as the standard, and discard the damaged square timber to ensure that there are enough square timber in the building. Of course, according to the different construction height, the meter number of building square timber will certainly be different, which should be estimated according to the actual situation.
How many building templates are required per square meter of the project?
In engineering construction, the conventional calculation, such as the conventional building template size is: 1220 mm × About 2440 mm, then a square meter requires about 0.336 building formwork. Of course, if your building template size is relatively large, then the number of sheets used needs to be calculated by yourself.
What kind of building formwork is needed in the project?
At present, there are many bamboo plywood formwork used. The bamboo plywood formwork has high strength and good toughness. The static bending strength of the board is 8-10 times of the wood strength and 4-5 times of the wood plywood strength. The use of bamboo glue formwork can reduce the number of supports. The width of bamboo plywood formwork is wide and the joint is few.
The basic size of the plate is 2.44 m x 1.22 m, equivalent to the area of 6.6 pieces of p3015 small steel formwork, and the formwork erection and removal speed is fast.