香蕉tv

Welcome to Chongqing Hengqing Wood Industry Co., Ltd!

Professional timber supplier Years of experience quality assurance

Hotline:

159-2294-2427  

 Chongqing wood processing plant

News classification

Product classification

contact us

Mobile phone: 13452900368

Telephone: 023-68629813

Email: 957016287@qq.com

website: vigpschool.cn

Address: No.8, area 14, Xingsong ceramic market, Huayan Town, Jiulongpo District, Chongqing


Prevent the stone on the ground from damaging the surface of building wood formwork

Prevent the stone on the ground from damaging the surface of building wood formwork

Date of issue: 2020-07-28 Author: Click:

    Before use Building wood formwork What are the reasons for this reduction?

    1. The construction wood formwork needs attention when leaving the factory!

    The construction wood template packing belt and the template need to use the gasket, the purpose is not to affect the use of the upper one and the lower one! A lot of people will say, it's not necessary! Let's make a simple calculation. Take 80 pieces as an example. If a whole vehicle is equipped with more than 2000 pieces, 28 pieces of goods are needed, and two pieces of goods are damaged. Then a whole vehicle is about 56 pieces of construction wood formwork. These wooden templates have been damaged before they arrive at the construction site!

    2. Pay attention to the protection of wood formwork during transportation!

    Is the construction of wood formwork before transportation, must use plastic cloth, or rain cloth to block the construction wood template! Why? Because if you encounter rain, sun exposure, or both during transportation. Then, before the construction wood formwork arrives at the construction site, the performance of the building formwork surface has been weakened. In the later use process, the demoulding stage is directly affected! And then the use of natural reduction!

    3. Construction site wooden formwork need to pay attention to storage!

    When the construction wood formwork is unloaded at the construction site, it should be placed on a relatively flat ground as far as possible. If the construction site is not placed on a flat ground or is about to be used immediately, it needs to be padded with three or four layers of cushion wood to prevent the stone on the ground from damaging the surface of the building wood formwork and affecting its use!

    For the temporary construction wood formwork that can not be used temporarily, it is necessary to place ventilation and shelter to prevent the construction wood formwork from soaking in water and sun to affect the glue performance and further affect the use times!

    In use and after use, what factors affect the use of wood formwork?

    1. Be careful before processing!

    Many construction workers in order to rush to finish the task, pick up the board to start processing, which will cause a lot of waste of half of the construction wood formwork, and the next time we need to use half sheet for cutting, we will find that we can't find it! Therefore, before processing, it is necessary to reasonably plan the cutting size of building wood formwork, and try to cut it to the point where it can not be cut! If you cut at will, you will find that about a quarter of the material loss is in the cutting process. Originally, a car of more than 2000 templates can only play a role of 1600 pieces, which directly affects the use times!

    2. When fixing the formwork, it is necessary to protect the construction wood formwork!

    If you need to nail on the wooden formwork, you need to pay attention to place the bottom under it. The purpose is to prevent the expansion and crack of the formwork caused by the nail knocking, which will affect the use times!

Website: http://vigpschool.cn/news/652.html

key word: Chongqing timber price , Building timber , Construction timber in Chongqing

What's new:

Online Service
share One click sharing